你好。
Hello.

在本教程中，我们将学习区域重置指令的用法，从指令名称中我们可以了解到它是对一个分支或一个区域进行一对一的重置。
In this tutorial, we will learn zone reset instruction usage, and we can understand from the name of the instruction it is resetting one on one branch or one area.

我们已经了解了这部电影。
Already, we learned the film.

我们先以自民党为例，五和电影。
Let's start with the LDP, for example, five and film.

而这5个是从30和10的数据开始的，所以从30开始，然后直到39都包括在内。
And with the five starting from the 30 and 10 data, so starting from the 30, then until the 39 is included.

另外，39 将是一个有 5 个电影模式，对于 M6，我将重置。
Also, the 39 is going to be a film mode with five and with the M6, I'm going to reset.

它是从30到40开始的区域重置，然后我们可以转换它。
It is zone reset starting from the 30 to 40 and then we can convert it.

我们可以将其发送到中华人民共和国，我们可以看到，在我们发送此程序后，我们是否完全坐在我的牧场上？
We can send it to the PRC and we can see, is it we're sitting completely my ranch or not after we sent this program?

让我们再等一会儿，看看有什么变化。
Let's wait a little bit more and let's see the changes.

好的，现在我们可以继续了。
OK, now we can continue.

我会说是的，现在这个壁橱已经完成了。
I will say yes, and it's completed now this closet.

我们去监视马克吧。
Let's go to monitor Mark.

我将从两个和五个开始，所以我会去味道最差的区域，我会让它说话，当然，一旦它现在打开，然后它现在关闭。
I will start with two and five, so I will just go to the worst taste area and I will make it talk, of course, once it is on now and then it is off now.

所以如果我去在线监控，输入数据监控并从30开始。
So if I go to online monitor, enter data monitor and starting from the 30.

这张地毯。
This carpet.

三十一、三十二、三十三、三十四、三十五、三十六。
Thirty one, thirty two, thirty three, thirty four, thirty five, thirty six.

三十七、八、九。
Thirty seven and eight and nine.

为此，在我开始监控之后，您现在会看到这些都是五个，然后是十个。
And for that, you will see now after I started to monitor these are all five, then ten.

现在的数据是五。
The data is now five.

好的，如何重置为区域重置？
OK, how can I reset as zone reset?

我们可以用上午六点重置它。
We can reset it with AM six.

让我们看一下，一旦第六场比赛将根据重置指令激活，我们将重置该区域，从 30 开始到 40，因为我将要去。
Let's take a look once Game six is going to be activated on reset instruction and we are going to reset this zone starting from the 30 till the 40 because of that I will go to.

监控，进入数据监控门就OK，没了。
Monitor, enter the data monitoring gate and OK, it's gone.

对此感到抱歉。
Sorry for that.

我就再写一次。
I will just write again.

五。
Five.

六、七、八。
Six, seven, eight.

九。
Nine.

好吧，六个。
And OK, and six.

让我们激活他们六个。
Let's activate them six.

只有一个脉冲。
Just one pulse.

好的。
OK.

切换为假。
Toggle false.

那么现在往往是有条件的。
Then now is often on condition.

现在已经开启了。
It is now on.

现在这些都归零了，让我们成功吧。
And these are all zero now, and let's make it off.

如果我在这里吃了两个和五个，你会看到现在我们将用总力量充满五个。
And if I ate two here and five, you will see now we are going to full filled with five with the total force.

你会看到这些都是五，但现在我首先将其设为零。
You will see these are all five, but now I will make it zero firstly.

我会将二和五更改为六和六将重置此区域。
And I will change two and five to six and six is going to reset this zone.

我们先再去切换一下。
Let's go to toggle first again.

这是一个，这些都被重置了。
This is one and these are all reset.

好的。
OK.

也许你可以问我。
You can ask maybe to me.

我们正在重置这些区域。
We are resetting these areas.

也可以重新设置了。
Also can be reset the.

是的。
Yes.

我们可以重置。
We can reset.

例如，从 30 到 40 开始。
And it's starting from, for example, and 30 to 40.

我们可以将它们全部重置为例如首次打开策略或首次上电状态。
We can reset them all into, for example, opening the policy the first time or first powering on condition.

我们可以重置市场或数据区域、注册区域等。
We can reset the markets or data areas, register areas and like that.

这对于策略编程也是非常有用的指令。
This is also very useful instruction for the policy programming.

下一期教程见。
See you into next tutorials.